E Mod Patriot Missile Group (PMG) Practice Test

These questions are part of the practice quiz. Start practicing

• In which tab is the HEU ID code and UTM location entered?
• Which of the following is NOT a Command Plan Planning Mode found in Tab 51?
• When does time stop for emplacement of the ICC with EPU?
• ICC tab 6 corresponds to which function?
• ICC tab 58 corresponds to which parameter?
• Which tab hosts the ASOJ Virtual Target Control function?
• At the ICC, how do remote and local tracks appear?
• How many TBM assets are in Tab 70 of the ICC?
• In Tab 14, Range to Cursor shows what?
• Where would a TDA go to find out how many hot missiles they have?
• Which tab is associated with Asset/Defended Areas in the ICC?
• Which tab contains the Clear Database by Category Fields feature?
• ABT Assets are definable as ________ and __________
• Which term describes a common reference point used in targeting within this system?
• How many pages are there in Site Amp Data?
• Which tab is responsible for the recurring 'UPDATE DATABASE' alert in the ICC?
• A jamming target is processed as a strobe under what condition?
• Patriot Battalion Techniques are published in which Army Techniques Publication number?
• BRASH stands for which data attributes used in track correlation?
• How many pages are in the ICC Tab 70 - Assets/Defended Areas?
• How many TBM assets can the ICC control?
• Which ICC tab contains LS Group Control & Allocation Plan?
• What software program is commonly used for initialization at the ICC?
• ABT assets need to be within _____ in front of FP?
• To combat the effects of jamming formations, the ICC can create a maximum of ______ Virtual targets per battery.
• What does URLAT stand for?
• The TD applies ceasefire and hold fire to targets with their AOR, and may apply engage hold on targets as appropriate.
• Which tab would you select to switch ICC operating modes and its database?
• For AMG Prepare for Movement, when does time stop?
• Where can you set the operator override time?
• Which Tab number enables cross-TADIL-J engagement coordination?
• Which tab and page shows the TBM data collection?
• T/F: When favorable target and FP pairing are found, the 5 data points (20 seconds) are gathered to enable integration over time and minimize the effects of errors in the message transfers
• What is ICC tab 15?
• Which ICC tabular display would you use to define external BN units?
• What is the maximum number of LTDA assets in Tab 70?
• Which of the following is an eight-level saturation alleviation label?
• In the FP Commo Control configuration, which tab is used to define the number of Patriot Fire Units?
• Which of the following is one of the three types of Unknown IDs for external reporting?
• In which ICC tab would you find altitude bands?
• What Switch indicator is used to find out what W-code & frequency each unit's radar is running?
• What tab shows the minimum recording time left on the electronic data recorder?
• ICC tab 51 is used for which function?
• ICC tab 90 is associated with which function?
• Which cable is required to connect the ICC to the TCS?
• From which tab can the ICC send MAW & CBR warnings to the fire units?
• How many crewmembers are required for PM&E of the ICC?
• What is the primary use of Battalion Tactical Initialization (BATI) at the ICC?
• In the ICC, local tracks appear with what brightness level?
• In what tab would a TD/TDA create a virtual target in support of the ASOJ engagement?
• Deployment/Command planning Control resides in which ICC tab?
• Who is responsible for performing all functions associated with engaging targets inside the ICC?
• Which of the following is an option for clearing a database in Tab 50?
• What is the primary purpose of gathering data points over time during favorable FP pairing?
• Which operator applies engagement overrides?
• Regarding the FP usage in calibration, which statement is accurate?
• Which S/I would you go to view the whole BN breakdown, verify FP's SAMSTAT, and number of LS in OPR, STDBY, LCL?
• Which statement about the Command Plan is incorrect?
• Which statement about RLRIU address sets and PADIL links is correct?
• If you need to adjust automatic launch point discrimination, which tab would you use?
• For Link 11B operations, which ICC tab is used to initialize track block numbers?
• During the Retrieve and Compare process, each FP involved must be in which state?
• Which calibration process selects two FPs that are both tracking the correlated track, and then calculates computational uncertainty of the calibration process?
• ICC tab 62 corresponds to which function?
• What does GLIF stand for?
• ICC tab 50 has what function?
• True/False: Time starts when the ICC truck is oriented at the marker stake and the command 'Halt vehicle'.
• The DLRP must be within how many degrees of the BNSCC?
• ICC tab 63 corresponds to which function?
• During tactical operations, which ICC tab is used to verify the PTL/STL positions of active FP radars?
• Which tab number corresponds to BN Geographic Control Parameters?
• FRND-1 on the display indicates which level of system status?
• Correlation boxes require 2 operator inputs to determine the initial correlation box values for the FP's Location and __________.
• Which ICC tab provides Tailored TBM Search Data?
• Enabling SIF allows you to choose interrogation of tracks when?
• Which item is listed as a TD responsibility?
• What action triggers the 'Max Trails Displayed' alert in TRAILS S/I?
• Which ECM concept is described as Stand-off Jammer Counter?
• The requirement of "3 Crewmembers" applies to which emplacement task?
• What console mode S/I will the TDA have active?
• Which ECM component is a measurement technique used to determine a target's position from two lines of sight?
• If Tab 70 contains 12 LTDA assets and 18 TBM assets, what is their combined total?
• Which data page shows the PPLI for a track?
• Which S/I would you use to view FP's essential capabilities?
• Which ICC tab shows the cumulative percentage of the total radar energy allotted to the TBM beam for defending assets?
• ICC tab 1 is for which parameter?
• HEU has issued a new STO that requires the operator to change the ADW for the CM threat. What tab would you use to make this change effective?
• Which label refers to Stand-off Jammer Counter in ECM?
• Which four cables must be connected between the ICC and the TCS?
• The ICC tab used to review authorization documents is which of the following?
• Which TD responsibility involves receiving tactical documents?
• ICC tab 64 contains which of the following?
• What document covers Patriot Battalion Techniques?
• Which of the following statements about the Edge Wedge Process is correct?
• Which of the following is a basic task to perform friendly protect?
• Which ECM technique helps locate a target by intersecting lines of sight from multiple sensors?
• Which command instructs the system to process a hooked track for engagement in normal threat order sequence, and is not used with TBM or ASM?
• When does time start for ICC with EPU Prepare for Movement?
• Which tab would you use to access Asset and Volume Status Control?
• LTDA content on ICC tab 70 is located on which pages?
• The two types of saturation alleviation are
• What term is defined as an area around each launcher with a significantly lower Pk percentage relative to the missile type?
• Which value is the maximum number of extra battalions Tab 69 can accommodate?
• ICC tab 61 corresponds to which function?
• Which sequence describes how to view site amplifying data?
• The To-Be-Engaged Queue indicates which targets are the most threatening and the best battery for the engagement.
• How many points can be found in ICC Tab 71?
• What S/I allows the operator to change the method of control between centralized or decentralized?
• Who performs the Edge Wedge Process?
• LTDA content on ICC tab 70 is located on which pages?
• When engaging a virtual target, during the final seconds of missile flight, the missile is commanded to ______ and continues toward the selected target.
• Which tab contains the HEU ID code and UTM location?
• Which of the following is not a valid volume attribute type?
• HAWK FIDOC input is located on which ICC tab and page?
• Which term refers to a counter-jamming stand-off capability in ECM?
• The TDA assigns engagements using the ________.
• Up to how many THAAD assets are listed in Tab 70?
• Which tab hosts the Compass Rose Tables used for heading correlation?
• What does the acronym PPLI stand for?
• Which filter inhibits processing and display of certain clutter returns (such as close-in vehicle traffic)?
• Which of the following is NOT a TBM asset shape?
• In Patriot Defense Design, which element helps gain track data from several FPs?
• Which engagement override group S/I stops the launch sequence, destroys missiles in flight and prevents re-engagement?
• In the ICC, remote tracks appear with what brightness level?
• To view site amplifying data, which sequence of actions should you perform?
• What is calculated as part of evaluating the calibration process described?
• Area of Interest is entered on which ICC tab and page?
• What are the allowed values for ECM wedges S/I in total and per elevation band?
• Which eight-level saturation alleviation label indicates remote status?
• Which term defines the speed limits for the Medium Speed category?
• What is ICC tab 72?
• Which calibration type focuses on horizontal angular alignment?
• During the retrieve and compare process, the received FU databases are compared in what order to ensure no conflicts?
• Launcher Group Assignment is located in which ICC tab?
• What is the function of Command Plan?
• Raid formations sizes can be reported and displayed from which range of tracks?
• As a means of the track evaluation function, the TD/TDA has the option of displaying a target's flight path and flight history. This can be achieved through which S/I?
• Tab 1 - FIDOC + Operational Parameters is used for which type of adjustments?
• The five major ICC tasks include Command Plan, Alternate Command Plan, Engagement Control, Equipment Control, and Friendly Protect.
• Under FP Commo Control, the system supports up to how many Fire Units?
• Volumes can have an ID attribute and a weapon control attribute. Volumes that have either, but not both, attributes are called _____________ (ID or weapon control).
• What is the maximum TBM assets that can be allocated to a Fire Unit by the ICC when allocating assets?
• What is used to provide ICC Operator with the ability to determine range and lateral extent of jammers?
• What is ICC tab 76?
• Which statement describes a Pure Volume?
• In which S/I selectable ICC tab can you check the fire units WCS?
• As a minimum, the TDA conditions the console with what 2 S/I from the console mode group?
• If a 'site error' alert is reported by a FU, which tab should be checked to confirm the ECS crew did not introduce obvious data errors?
• This setting establishes an altitude threshold used for the assignment of the High Altitude Air Threat Category
• What does the acronym TADIL stand for?
• ______ is the function of comparing the individual track reports from each reporting source and combining these reports into a single track.
• You want to convert a LAT/LONG to a 9 digit UTM, what tab do you use?
• How many pages are in the ICC Tab 71 - Volumes?
• Which ICC view shows how many hostile tracks a battery is tracking?
• Alternate ATM2/ATM3 engagements are specifically designed for which threats?
• Site Amp Data has how many pages?
• The tab that shows altitude bands is which and on which page?
• Which of the following is NOT a primary concern of the Command Plan?
• ECM wedges are used for what?
• Where do you go to send an Alert State to a FP?
• Which of the following is NOT among the five major ICC tasks?
• Which tab is used to find out what W Code and frequency a FP is using?
• Tab 72 in the ICC is used for which type of content?
• The master ICC is also known as which of the following?
• Which of the following is one of the ICC's five major tasks?
• The URLAT data location in the ICC interface is on which tab and page?
• What ICC tab do you use to reallocate an LS?
• What term denotes the time for the last opportunity for the threat to cross the asset boundary?
• What S/I would you go to view comm net status of TADILJ?
• What is ICC tab 79?
• Which document contains the JU# used for TADIL-J reporting?
• Which page accompanies the Track tab to provide detailed track information?
• Which tab is used to select the mode of initialization?
• The TD correlates tracks using BRASH data. Which five data items are included in BRASH?
• Track Down Tell is used to specify which units to receive track down-tell messages?
• HAWK FIDOC input location?
• What are the three Unknown IDs that can be sent for external reporting?
• __________ display ID volumes with safe passage corridors, restricted, prohibited, friendly, or hostile origin attributes, ID volumes with Weapon Control Status, IFF on line, passive ID on-line, and combined IFF/passive ID on-line
• Which ICC tab is used for operator correlation?
• The BNSCC should be center of__________?
• During the command plan process, which ICC tab could TD/TDA use to disallow communications to their HEU?
• Which is not one of the eight levels of saturation alleviation?
• What is one method to drop load in TBM search?
• Which ICC tab, selectable only during tactical operations, is used to verify the position (PTL/STL) and azimuth of active FP radars?
• Which term indicates prioritized targets for engagement and the best battery?
• In which ICC tab can you plan all the fire platoon UTM and PTLs?
• In the ICC where are the authorizations found?
• The Tab needs to be exactly the same between the ECS and ICC?
• What type of tracks are those that report their own position and track number over an external network?
• In which tab is the total communications net load checked?
• ICC tab 67 contains which of the following?
• After TBM type confirmation, what filtering is used to determine if the threat meets proper kinematics?
• On the display, just to the left of the ICC Alert Line, above the TOD clock appears FRND-1, this is a level of what?
• What is the TDs most important duty?
• Which TD responsibility involves TAB Packet creation/management?
• The ICC can have up to _____ ABT defended assets?
• Correlation consists of two functions. Which option lists both?
• Which tab handles ICC/CRG/LCS Communications Assignment?
• The function of assisting the BN commander in planning and implementing BN deployments and reallocating assets and volumes is referred to as _______?
• Which tab is used to verify correlation of Mode 1 and Mode 3A responses for SIF when the SIF table is activated?
• Which Unknown IDs are used for external reporting are the correct trio?
• Tab 69 accommodates how many extra battalions?
• ICC tab 71 provides access to which data set?
• In the ICC where do you find your URLAT?
• To tell how many launchers are in operate at a fire platoon, where would you look?
• In which tab can you plan ICC location and antenna azimuths?
• In which tab is the Fire Platoon type (Patriot, HAWK, THAAD) entered?
• Which tab and page combination is used to allow or disallow strength track correlation?
• Which Tab is used to define the ICC Link information for TADIL-J for the ICC?
• What tab can you view the range from your FP to your cursor?
• Which option is NOT a Saturation Alleviation state?
• The TCS supports _____ and compliments _____ activities in the ICC.
• ICC tab 54 is used for which function?
• Which tab can the ICC operator use to find out how many hostile tracks Bravo Battery is tracking?
• ABT assets assess both ABT and TBM threats with a 2 km radius for TBMS.
• Which tab is used to define external BN units in the ICC?
• Which tab is used to perform database initialization or clear initialization data?
• Launch point determination is enabled via which Tab and Page to print the inverse TBM launch locations?
• Radar Frequency Control for FP resides in which ICC tab?
• The Track Down Tell function is used in conjunction with which group to select specific units to receive track down-tell messages?
• The ICC Status S/I is used for what?
• Which crewmember in the ICC is responsible for ID of all targets?
• NOT a saturation alleviation method?
• In which tab can the ICC operator find the track number for a specific FP?
• Which option lists the two types of saturation alleviation?
• Which tab would you use to verify the number of launchers currently in operation at a fire platoon?
• Which ICC tab combines Data Communication Control with FP Communications Control and Hawk FP Track Filter?
• Tab 70 in the ICC is associated with which function?
• Which tab allows the operator to see all assets and volumes initialized in the database and their activation at each PFP?
• Which ICC tab is associated with Battalion Communications Control Data Entry?
• How many data points are gathered during favorable FP pairing to enable integration over time?
• Where would you find the Strength Track Correlation tab?
• The automatic ICC function that improves alignment data of the FU using only targets of opportunity is called what?
• What is the term for the maximum distance error between actual radar location and true radar location?
• Which document is issued for wartime operations to coordinate Link 11B communications?
• Which ICC tab do you check the commo net status?
• Which tab is used to input THAAD and LTDA assets?
• To display unresolved range jamming targets, the ICC operator must enable which S/I under Track Data Tab?
• Which process is associated with determining a single target position using multiple observations?
• Mode 4 codes are entered directly into the IFF interrogator at the FU. What 4 page tab can the ICC operator enter 2 digit Mode 1 and 4 digit Mode 3 codes in 30 minute increments?
• How many PATRIOT Fire Units can be defined in Tab 68 - FP Commo Control?
• Which tab inputs THAAD and LTDA assets?
• To access ICC location planning, which tab would you open?
• Which tab provides access to target display control for coordinate handling?
• Override class conflicts in the ICC is accessed from which page?
• What is a bulls-eye?
• What S/I allows the ICC to pull a subordinate unit centralized?
• Which tab allows the database initialization mode to be selected or to clear all initialization data from related tabs?
• The TDA monitors Party Line ______.
• Which tab is used to manage volumes allocations?
• Where can you change the Method of Control between Centralized or Decentralized?
• BNSCC stands for which facility?
• Which of the following is NOT listed as an option for clearing a database in Tab 50?
• What is ICC tab 14?
• Entering Area of Interest is done on which tab?
• Volumes that have both attributes are called ______________
• When does time stop for AMG Emplacement?
• Which of the following is a type of Data Collection and process?
• When does time start for AMG emplacement?
• The UTM world model is entered into which ICC tab?
• In which tab do you conclude BATI?
• What is a system generated artificial target?
• The Pitch and Roll category consists of which components?
• In what tab would you look to find the ICCs location?
• Which S/I displays the elevation bands?
• Which ICC tab is used to display TADIL-J track numbers?
• Who assigns all engagements to the FUs from the TBEQ?
• Override target classification is performed on which data section?
• For CRG/AMG with EPU emplacement, time starts when the EPU is positioned over which marker?
• Virtual targets are created and evenly spaced across the wedge to increase the probability of ______?
• What is ICC tab 13?
• To input THAAD assets, which tab should you use?
• According to Tab 70 data, the total number of LTDA and TBM assets combined equals what?
• At an ICC, in order to see a particular unit's search/track sector on scope, which S/I is used in conjunction with Sector Bounds to perform track management?
• For AMG Prepare for Movement, when does time start?
• __________ tab appears automatically upon hooking a track.
• The Process for Engagement (PFE S/I) command is not used with which threat types?
• Where does an ICC operator verify a track's PPLI?
• Which setting provides the altitude threshold for High Altitude Air Threat Category?
• Site Calibration improves alignment data of which unit using targets of opportunity?
• How many Levels of Saturation Alleviation does the ICC have?
• How many databases can the ICC hold?
• Where can you find the clear database by category fields?
• Which ICC tab stores Volumes?
• ICC tab 2 is used for which function?
• Self-defense criteria for the ICC can be turned on in what tab and page?
• The ICC supports the ECM process through three elements. Which of the following is NOT one of them?
• ICC tab 68 contains which of the following?
• Site calibration is a process divided into 2 unique categories. What is one of those categories?
• The BN/ICC Display should be the center of which display or operation?
• For CRG/AMG with EPU prepare for movement, when does time stop?
• In a network with multiple ICCs, the master ICC is referred to as which?
• The initialization process in ICC is controlled by which tab?
• _____ is considered the battalion frequency manager and has the ability to monitor frequency faults and assign new frequencies.
• In an ICC interface, where could an operator input values to restrict the number of missiles for a particular missile type to be fired?
• ________ enables or disables the weapon control status for weapon control volumes only at FP.
• The lowest level of saturation alleviation is which label?
• How will the ICC attempt to correlate tracks?
• Which screen shows the number of tracks by category and totals the saturation levels of each PFP?
• Which tab is used for correlation when two FP each see a strobe/jammer that is not range resolved?
• Which ICC tab provides IFF/SIF configuration?
• For CRG/AMG with EPU prepare for movement, when does time start?
• Which tab defines ICC Link information for TADIL-J within the ICC?
• How many crewmembers are required for CRG/AMG with EPU Emplacement?
• Which tab corresponds to the Data Collection Control function?
• In the TRAILS S/I system, what is the maximum number of TRAILS that can be displayed per manstation?
• In the ICC, how many Battalion TBM assets can be displayed in Tab 5?
• Which S/I displays lines showing bearing to a non-range resolve jammer?
• Which TD responsibility relates to tactical information?
• What tab and page allows you to enable or disable strength track correlation?
• Which ICC tab is used to authorize the TCS?
• What happens when the hooked track is dropped?
• Which of the following is NOT listed as a TD responsibility?
• What is the maximum number of ABT defended assets the ICC can have?
• Which tab allows you to assign volumes to certain fire platoons?
• General Purpose Maps resides in which ICC tab?
• What is the maximum deviation of the true azimuth of the radar to measure azimuth as determined by the method of alignment Compass or Survey?
• Where does the ICC operator receive the JU# for TADIL-J reporting?
• How long must an ICC operator wait in order to decorrelate a manually correlated track?
• How many ABT assets are in Tab 70?
• What are the Saturation Alleviation states?
• Which ICC tab corresponds to Operator Correlation + Track Number Change?
• What tab and entry provides the operator the opportunity to define altitude parameters concerning track correlation?
• Which tab provides a means to correlate Modes 1 and 3 SIF with aircraft headings?
• In which ICC tab can you authorize the TCS?
• Which tab can you find range bias for a FP?
• The ICC can alert FU's to missile attack and CBRN environment by activating the missile attack warning + CBRN warning indicators in the ECS. These are activated in which tab?
• Which of the following is NOT one of the five major tasks conducted in the ICC?
• What is PPLI?
• What measurement factor is associated with the size and noise measurements of a detected track?
• The TBM Threat Set Control is managed on which ICC tab?
• Which statement about the 26 Pair Cable Hock is true?
• ICC tab 44 corresponds to which function?
• Which ICC tab proves the capability to select correlation of Mode 1 and 3A responses for SIF with activated SIF table?
• Triangulation supports track evaluation, ______, and missile guidance.
• What are the functions of the TD?
• How many pages are in the ICC Tab 72 - General Purpose Maps?
• Which tab is used to access volume information in the ICC?
• How many options for clearing a database are listed for Tab 50?
• Which tab appears when an operator presses the command plan S/I?
• The ID AREAS display includes ID volumes with Weapon Control Status, IFF on line, passive ID on-line, and combined IFF/passive ID on-line. Which content best describes the display?
• Which tab is used to enter the Fire Platoon type?
• In an engagement sequence, what does 'On-Board Home on Jam' imply?
• What does the PFE S/I do?
• During peacetime training, the TDs most important duty is to _____
• ICC tab 18 contains which parameter set?
• Which tab would you use to verify that fire units have area enable turned on?
• If you need to assign engagements to front units from the TBEQ, which role initiates the chain?
• What is used to prevent inadvertent ground impact with interfering structures during TBM engagements over populated areas?
• Which ICC tab is used for FIDOC Operational Parameters?
• ECM STROBES provide bearing information for which type of emitter?
• What entry establishes the speed range for the Medium Speed and Heading Track Vector that protrudes from each track?
• Which four ICC tabs constitute the commo database?
• What S/I reports the connected units MOC, WCS, and AE in the appropriate field?
• How long is the data collection window that includes the 5 data points during favorable pairing?
• From what tab is automatic launch point discrimination controlled?
• The ICC Status S/I is used for what?
• What are the two ways the TDA passes engagement commands?
• ICC tab 70 contains which asset category?
• The BN Tracking Summary screen provides totals of saturation levels by PFP. This information is primarily used for what?
• Which of the following is a Type of Unknown ID besides UNK PEND and UNK SUSP?
• In practice, Hold Fire prevents re-engagement and stops which sequence?
• Which operator will normally display alerts associated with the weapons control engagements and equipment status?
• Raid formations maximum track size?
• In which Tab do you allow the TCS in the ICC?
• Which tab is used to locate FP locations/boundaries during operations?
• Which tab displays the E2IC IP address?
• To confirm the number of hostile tracks for Bravo Battery, which ICC view should be opened?
• What is the maximum distance error between the actual radar location and the true radar location as determined by Map, Modified Survey, or Survey?
• Air defense systems provide command and control. The following functions must be performed: target ID, Threat assessment, Fire distribution, and what?
• The ICC computes a range denied targets range using track and strobe data from 3 or more FPs. This process is known as?
• TMAT configuration is stored in which ICC tab and page?
• How many TLAs can be tailored in tab 56?
• The ECM wedges S/I can have a maximum of how many wedges in total, and not more than how many per elevation band?
• Which of the following is NOT a task performed by the ECM track management software?
• Time stops for the emplacement of the CRG/AMG with EPU when?
• For ICC with EPU Prepare for Movement, when does time stop?
• What is an important element in Patriot defense design that helps assist in gaining track data from several FPs?
• Which of the following is a method available to the ICC for friendly protect?
• Which tab allows you to check whether fire units remembered to enable areas?
• How many track numbers can the ICC store on a common track?
• In which Tab do you allow engagement coordination to occur across TADIL-J?
• How many major tasks are defined for the ICC?
• Which tab number corresponds to Target Display Control?
• In the ICC, the TMAT is set in which tab and page?
• This tab shows track, threat, and ID data on the track hooked at the operator's console.
• During BATI, which tab appears a second time to allow the operator to alleviate assets by the FU by deactivating them?
• Which tab is used to disallow communications to HEU during command plan?
• How many crewmembers do you need for AMG emplacement?
• What is the center of the ICC display?
• Refraction parameters are found on which tab and page?
• For CRG/AMG with EPU emplacement, when does time stop?
• Tab 13 is designated for which ICC functions?
• Which data set contains information about comms net faults?
• ABT Assets are definable as ________ and __________
• Which element provides information that allows the ICC operators to determine range and lateral extent of a formation of aircraft with on-board ECM capabilities?
• Which of the following is NOT a calibration category for site calibration?
• Assist BN CO in planning and implementing BN deployment and reallocating assets and volumes (both initialization and tactical), is what?
• Where do you go to view a FP's essential capabilities status?
• In the calibration process, which item is calculated to assess calibration quality?
• In CRG/AMG with EPU emplacement, time starts when the EPU is positioned over which marker?
• Which tab is used for UTM world model input?
• The strobe correlation process performed by the ICC is also known as?
• What term is used for the ranking of preferred missile type when the target GIP falls outside user-defined lethality zone?
• ICC tab 69 contains which of the following?